About this lab
Four lessons, one thread: seismic waves carry distance information, three stations pin down the epicentre, and the shadow zones of the whole Earth reveal its interior.
The source is where the rupture begins underground, and the epicentre is its projection on the ground. Magnitude describes the size of an earthquake; intensity describes the effect at one place. They are not the same thing. P waves are fast and S waves are slow, and the gap between their arrivals at one station is a measure of that station’s distance from the source.
Lessons 1 to 3 use a uniform-rock teaching model (Vp = 6 km/s, Vs = 3.5 km/s); lesson 4 uses the spherically symmetric PREM velocity structure and traces rays with a conserved ray parameter. The landscapes, cities and sand table are original illustrations, not real places.
Four results
Four results
- Source, epicentre, magnitude and intensity: each step of +1 in magnitude releases about 31.6 times the energy, and +2 about 1000 times. That does not mean 31.6 times the damage. In one earthquake the nearer city has a higher intensity than the farther one, and a deeper source lowers the intensity at both. Intensity is estimated with the teaching formula I = 1.6 + 1.5·M − 3.0·log10(R); the coefficients are teaching values, not an attenuation relation for any region, and they do not rate whether a building is safe.
- P and S waves: a P wave makes particles move back and forth along the direction of travel, and an S wave makes them swing across it. At distance d, P arrives at d/6 s and S at d/3.5 s, so S−P = d/8.4. At 35, 105 and 175 km, S−P is 4.17, 12.50 and 20.83 s: the farther away, the larger the gap.
- Locating with three stations: each station’s S−P gives a distance, which is a ring on the map. Two rings cross in two points, and a third ring rules one out. In the teaching scene the three rings meet at (30, 40) km. Adding 0.5 s to the S−P at station B grows its radius by 4.2 km, the three rings no longer meet at one point, and the crossing becomes an error triangle of about 12.1 km²: a location is an area, not an exact point.
- Shadows and the interior: S waves cannot cross the liquid outer core, so stations beyond about 102.6° receive no direct S. P waves refract and bend sharply as they enter the outer core, so stations between about 98.4° and 145.0° receive no direct P: that band is the P shadow zone. P waves can cross a liquid, so the shadow comes from refraction, not from P being blocked. When the outer-core radius changes, the shadows move with it, which is why shadow zones can constrain the interior.
Model and sources
Model and sources
- Block and intensity: the block is 200 km long, 120 km wide and 400 km deep, with depth compressed to 0.22 in the picture. The layer depths (sediment 5 km, upper crust 20 km, Moho 35 km), the fault dip of 60° and the epicentral distances of 20 and 120 km to the two cities are teaching values. Rupture length follows 10^(0.59M−2.44) km as an illustration; the offset of the layers and the size of the buildings are exaggerated, and the source is treated as a point. The intensity coefficients are teaching values and are not fitted to any observations.
- Waveform: the wavelet is two cycles of 0.5 Hz starting at the arrival time, with a relative amplitude of 0.45 for P and 1.0 for S. The rock core is drawn 210 km long, particle displacements are magnified by about 3.4 km, and each seismogram is the sum of the same wavelet at the P and S arrival times.
- Location: a uniform-rock, flat, zero-depth teaching model with stations A(0, 0), B(100, 0) and C(0, 100) km and a hidden epicentre at (30, 40) km. The location is the point that minimises the sum of squared ring residuals; the error triangle uses, for each pair of rings, the crossing closest to the third ring. The sand table is an original 160 km × 160 km landscape, not any real place.
- Ray tracing: velocities come from PREM, taken from the TauP model file prem.nd distributed with ObsPy and checked on 2026-11-17; the 0–3 km ocean layer is not included. The source is at the surface; the ray parameter p = r·sin i / v is constant along each ray, η = r/v is linear within each layer and integrated in closed form, and an S ray stops where it meets the outer core, where Vs = 0. Only direct waves and P waves through the outer and inner core are drawn; reflected and converted waves are not, and neither are the very weak inner-core reflections inside the shadow. The shadow limits are the limits of geometric rays and are blurred by diffraction on real seismograms.
- A solid inner core cannot be proved by the S shadow alone; it needs waves that cross the inner core and other evidence. The unfamiliar planet changes only the outer-core radius and is not an inference about any real planet. Early warning uses the fast P wave to gain time; it does not predict earthquakes.
The Earth imagery is from NASA.
- Dziewonski, A. M. and Anderson, D. L. · 1981 · Preliminary reference Earth model, PREM (PEPI 25); values taken from ObsPy’s prem.nd ↗ ObsPy is released under the LGPL; only the depth, Vp and Vs columns are used; checked on 2026-11-17
- NASA Earth Observatory · Blue Marble: Next Generation ↗ Surface imagery of the Earth